Features | Application |
1. Semi-open, High Chrome Iron impeller with replaceable/adjustable High Chrome Iron Wear rings, increases wear Resistance, when pumpage contains abrasive particles. | 1. Commercial, industrial dewatering and construction site drainage. |
2. Double inside mechanical seals with silicon carbide faces, (both top and bottom) running in an oil filled chamber and further protected by a lip seal running against a replaceable, 420 stainless steel shaft sleeve, provides for the most durable seal design available. | 2. Effluent transfer |
3. Highly efficient, continuous duty air filled, copper wound motor with class B or F insulation, minimizes the cost of operation | 3. Decorative waterfalls and fountains |
4. Built in thermal & amperage sensing, protector prevents motor failure due to overloading or accidental run - dry conditions. | 4. Raw water supply from rivers or lakes |
5. Double shielded, permanently lubricated, high temperature C3 ball bearings fated for a B-10 life of 60,000 hours, extend operational life. | |
6. Top discharge, flow-thru design enables operation at low water levels for extended periods |
Specifications | Standard | Options | |
Discharge Size | 4", 8" Npt (100, 200mm ) | Available in all Stainless Steel | |
Horsepower Range | 20 - 150Hp. (1.5 - 11Kw* | ||
Performance Range | |||
Capacity | 100 - 1700Gpm (.37 - 6.4 cubic metre/ min ) | ||
Head | 30 - 600Ft. - 100 Ft. (1.5 - 30.4m ) | ||
Maximum Water Temperature | 104F. )40C) | ||
Materials of Construction | |||
Casing | Cast Iron | ||
Impeller | High Chrome Cast Iron | ||
Shaft | 420 Stainless Steel | ||
Motor Frame | Cast Iron ASTM A48 Class 35 | ||
Fastners | 304 Stainless Steel | ||
Mechanical Seal | |||
Upper Seal | Silicon Carbide / Silicon Carbide (75 - 150 Hp.)Silicon Carbide / Silicon Carbide (20-60 Hp.) | ||
Lower Seal | Silicon Carbide / Silicon Carbide | ||
Elastomers | NBR (Nitril Buna Rubber) | ||
Impeller Type | Semi-open, solids handling | ||
Solid Handling Capability | Strainer Opening Size | ||
Motor Nomenclature | |||
Type, Speed, Hz | Air Filled, 3600 Rpm, 60 Hz. | ||
Voltage, Phase | 208/230/460/575 V.., 3 Phase | ||
Insulation | Class B (20 - 20 Hp.), Class F (40 - 150 Hp.) | ||
Bearings | Pre-lubricated, Double Shielded | ||
Accessories | Submersible Power Cable 49' (15 m) | Length as Required | |
Operational Mode | Manual | TS-303 Float Switch |